Is Vape Pens With Filters Really As Good As Their Dummy Ones?

One of the most popular reasons for the popularity of vaporizers, especially those that use cigarette filters as atomizers, is that you can get all the same features, including heating and control, from the atomizer part of a vaporizer.

If you use a “cigarette style” or other kinds of filter, there are two basic ways to get the same level of efficiency with a filter atomizer.

One is the cost – the more you spend on a filter, the less efficient it is as a heating element. The other is the degree of compromise involved in trying to get a cleaner atomizer while using a cheap filter.

In most cases, though, you’ll find that it’s more practical to use a filter that you’ve used before. That means buying a new filter and using the atomizer that came with your vaporizer. Here’s a quick rundown of a few reasons why this may be a good idea.

The first reason is that, because of the cost involved, the amount of old filter that comes with an atomizer that uses a filter is far greater than the amount of old filter that comes with a filter atomizer.

So what happens?

The filter is simply discarded. A new one is bought and the old one is thrown away. And the filter is disposed of, too.

But sometimes you just get tired of using a natural type of filter.

You may get sick of the sticky residue that sticks to it, or you may find that you simply prefer the clean feel of an atomizer that has a clean, simple metal part and a mesh one with a metal filter, but is still not really what you want.

Also, even if the filter isn’t the problem, the replacement filters may be more difficult to replace because the mesh filter might only fit one way. At times you have to rip it out, or else get a new style that will fit and attach better to the atomizer.

One of the reasons that filters are better than atomizers for using a vaporizer is that they tend to give better heat protection. By using a filter with a smaller surface area for heat transfer, you’re able to get the heating even on a cold day. Also, the heat doesn’t build up on the filter, so you have less of a chance of getting burned when using a filter atomizer.

While both kinds of atomizers can be used to do the same thing, they also have their differences. An atomizer allows heat to be transferred by allowing air to be drawn through the wick, which is then moved through the coil of the heating element. A filter, however, does not allow air to pass through.

Of course, while this may seem like a bad thing, it can actually be advantageous. One of the reasons that you’ll find that heating is better with a filter than an atomizer is that you can get better, more consistent heat throughout the device. And, since the filter doesn’t allow air to pass through, you can use it longer and get more use out of it.

Another good reason to use a filter is that, while they are less expensive than the full-featured ones, they still come with many features.

Some of these can include temperature settings, adjustable wattage, automatic shut off, and other things. These don’t come for free, though, so it makes sense to look at the potential expense of upgrading a filter.

But, if you’re already using a wax atomizer with a piece of paper, there’s no reason to change. The same goes for an oven. There’s no reason to pay more for a better glass piece, unless you want the best glass on the market.

You’ll be better off sticking with a filter, especially if you know how much you’re going to be using it. You can spend less money on a unit, and you’ll use less of the unit, because it can be refilled without losing any of the hot air that could cause any damage.

Whether you’re going to use your vape pens with a filter or not, you’re going to save a lot of money in the long run. when you use a vaporizer that has a filter and does not have a heat exchanger.

Blog E-liquid

How to make vape juice?

How to make vape juice?

Vape juice or as some know it as, e-juice or vapour liquid, is a mixture that includes: Water, food-grade flavouring, the level of nicotine or no nicotine at all, propylene glycol (PG) or vegetable glycerin (VG).

Why make your own vape juice? Well, the answer is quite simple.
• It tastes better because you can experiment with the flavours you enjoy and like the most.
• It is cheaper and will not cost you an arm and a leg.
• And lastly the quality is way better, due to you knowing what the liquid contains.

You do not have to be an Einstein or a science wiz to create your own juice. You just have to follow these steps and you are ready to go:

Some VG and PG. You will need approximately 100ml of each. Get a premade bases where the ratio of VG and PG is already mixed. Next, you will need some plastic bottles as well as pipettes. The best part is choosing the flavouring that you will enjoy.
Take your 50 ml empty plastic bottle and use the plastic pipettes to drip 10 to 20 droplets of flavouring. Fill the bottle halfway with PG and the rest with VG till the top. Now shake your mixture and let it sit for a few hours, giving the bubbles time to settle down.
Taste your mixture and enhance it till you are satisfied.

When making your own vape juice, there are 2 methods to choose from to mix your e-juice:

1. Mixing by weight
Taking each ingredient and weighing it, by using a scale and estimating its gravity.

2. Mixing by volume
Each ingredient’s volume is measured by using large syringes, one per ingredient. This is the easiest method but not as accurate. Using a calculator when mixing, will also simplify things by translating percentages to ml, but will tell you exactly the number of the nicotine base fill you need to satisfy you. When it comes to nicotine, never eyeball it, because it is poisonous on its own.

It does not matter which method you choose; you will need the following ingredients to make your ideal vape juice:

• Base liquid
You will need your VG and PG; these are the most important ingredients. The base liquid, which is zero nicotine, can also be bought premixed. But rather buy your own PG and VG ratio, so that you have flexibility over your final product.
Ensures that both the VG and the PG are pharmaceutical grade so that you know it is safe to use for your mixing.

  • Vape flavour(concentrates)

This is how your juice will taste at the end of the day. Stay away from essential oils and rather use concentrates, that is specifically designed for vaping.

If you want a batch that is already mixed and being mysterious is your thing, you can always try the new vape wild mystery flavours. There are so many fun flavours to choose from like, Underboss, the streak and the sherbinator being just a few of them.

  • Nicotine

This part is up to you and the level of nicotine that you favour. Make sure to put safety measurements in place, when handling nicotine such as wearing gloves and keeping it out of the children’s reach.

You will need the following items:

  • Storage bottles

A couple of 50- or 100-ml bottles will be perfect. When you decide to add nicotine and store it, make sure to use bottles that are made of amber or cobalt. This will make the slowing of the degradation possible, through the dark colour and the solid glass.

  • E-juice bottles

You can use PET and HDPE- plastic for long-term use, but also LDPE. It is easy to find and does not hurt the pocket.

  • Adding labels

Buy some sticky labels, to identify which of the creations are which.

  • Lastly don’t forget to use gloves, when you are working with nicotine.

What to do after the juice is made?

The next step is the steeping process. This is the process where time is needed for flavours to mix and settle. Every mix differs from each other. Some need a few weeks to blend others don’t need to be steeped at all. Place the e-liquid in a dark place for 3 days and give it a shake once in the morning, and once at night. Your liquid will be ready in 2 days’ time.


Keep your juice in a dark cool place, because sunlight, oxygen and heat can impact your juice negatively.

Ingredients to avoid when making your own vape juice

  • Any flavouring that is not designed for making your own vape juice.
  • Any type of essential oils
  • Very high levels of nicotine
  • Any item you find in the house and think that you can use
  • Diacetyl, it is a harmful substance and is not safe to consume. This substance is what gives popcorn its buttery flavour, but this does not mean it is save for inhaling purposes.

Vape juice starter kit

If you want to get all the supplies from the start, there are many kits for beginners that come with everything you need, for you to put your shoulder to the wheel. Most of the kits are for mixing by volume and you will also get a mixture of syringes with your ingredient.

A vape kit can include the following:

  • Nicotine
  • Vegetable Glycerin
  • Propylene Glycol
  • Chubby gorilla bottles
  • Pipettes
  • Leur lock syringes

You can buy a DIY liquid e-juice mixing accessory pack on Amazon, that contains the following:

  • Refilling bottles
  • Syringe needle
  • Drip tip
  • Funnel gloves
  •  Labels
  • Measuring cups.

E-juice calculators

If you want results that are accurate and want the same results repeatedly, you will need to acquire e-juice calculators. The calculator achieves the information you need and the amount of nicotine you need to create your favourite level of strongness, as well as how much from each ingredient. It does all these functions, effortlessly.

Devices for your vaping needs and materials:

Now that you have the juice, you need the device. There are so many different vaporizers you can choose from. Here are some examples:

  • The Hippie Bee

This ultra-portable Pod system is ergonomically and designed by keeping simplicity and efficiency in mind. The best thing about this vaporizer is that it is an all-in-one pod, providing you with comfortability.

  • Hippie Nano Plus

This is the world’s smallest vaporizer for liquid. It is designed for discretion and makes it convenient for you to throw in your purse or pocket and hit the road.

There is also a guide on how to purchase your first vape pen. Go check out our website for more info.

Are you up for a challenge and want to try something new? Now is your chance to create your own homemade vape juice with the flavours of your choice. The process is easy and does not require a lot of ingredients.
All you need is 3 main ingredients that include, PG, VG and the flavouring of your choice and you will have your own vape juice to brag about to your friends.

Just always remember to keep your safety measurements in place. Like keeping your gloves on hand and your mixtures out of the reach of your munchkins.
Ready, set, vape!